Table of Contents
Advertisement
The dryer is levelled using the
■
threaded feet.
Check the alignment of the
Note:
appliance with a spirit level and
correct if necessary. Change the
height by turning the appliance feet.
All appliance feet must stand firmly
on the ground.
Incorrect alignment may cause high
noise levels, vibrations and improper
movement of the drum.
If in doubt, have the appliance
Note:
connected by a specialist.
Optional accessories
Order optional accessories
the after-sales service:
Washer-dryer stack connection set:
■
To save space, the dryer can be
placed on top of a suitable washing
machine of the same width and
depth.
The dryer must be fastened to
the washing machine using this
connection set.
Order number with pull-out worktop:
WZ20400;
Order number without pull-out
worktop: WZ11410.
*
Depending on the model
from
*
Installation and connection
Platform:
■
For easier loading and unloading,
raise your dryer with a platform.
Transport laundry with the clothes
basket integrated into the platform
drawer.
Order number: WZ20500.
Connecting kit for the
■
condensation drain:
Use a hose to draw off
the condensation immediately.
Order number: WZ20160.
Transport and frost protection
To empty the condensate container:
Use the programme selector to
1.
select any programme.
Press the Start button.
2.
Wait for 5 minutes.
3.
The condensation is drained.
Note:
Empty the condensate container
4.
again.
Switch off the dryer.
5.
Caution!
Any residual water may leak out
and cause material damage.
Transport the dryer in an upright
position.
en
13
Advertisement
Table of Contents
