Dip Switch 4: Pip Dimension Setting; Restore Factory Default - Eneo MAM-5MM1001M0A User Manual

DIP Switch 4: PIP Dimension Setting

DIP Switch 4 ⇓ (Adjust PIP Dimension)
This function can only be activated on DIP Switch 2 and DIP Switch 3 both at ⇓
position.
Button as PIP sub-screen dimension setting, press ◄ to decrease PIP sub-screen dimen-
sion, press ► button to enlarge PIP sub-screen dimension.

Restore Factory Default

Hold and press ◄ button, then power on. After 5 seconds to release ◄ button.
CAUTION:
• Before switching HDMI/VGA monitor, please make sure
your monitor supported resolution. If the monitor not sup-
ports the resolution, then there will be no output.
• If the PIP sub-screen from SD source, then the sub-screen
picture will comes black edge.
• This product HDCVI input and HDCVI loop out do not sup-
port audio and data transmission.
• When HDTVI,AHD or HDCVI input mode selection error,
the picture will become black and white. Please have
AD001HD4 reboot.
EN
9