Adjusting The Input Level - Kenwood C-707i-S Instruction Manual

External Components
62
C-707I C-707I
en08_c-707i.indd 62 en08_c-707i.indd 62

Adjusting the Input Level

Use the procedure below to adjust the input level for the external
component connected to the [AUX IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same volume
setting.
1 1
Select AUX as the source.
Press the [AUX] key.
Press the [INPUT SEL.] key.
The source changes as shown below each time you press the key.
AUX
2 2
Adjust the input level.
Press the [<] or [>] key.
Adjusting the input level also changes the volume of the external component
connected to the [AUX IN] terminal.
D. AUDIO
You can adjust the input level in a range
from –3 to +3.
12/25/2007 11:44:54 AM 12/25/2007 11:44:54 AM