Adjusting The External Component Input Level - Kenwood K-521-B Instruction Manual

Connecting Other Accessories (Commercially Available Units) R P.13
Related Related
Audio Settings R P.47 onwards
Information Information
K-521E̲B60-5813-08̲01̲GVT0294-002A.indb 43 K-521E̲B60-5813-08̲01̲GVT0294-002A.indb 43

Adjusting the External Component Input Level

Use the procedure below to adjust the input level for the external
component connected to the [AUX IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same vol-
ume setting.
1 1
Press the [AUX] key.
2 2
Press the [MODE] key.
3 3
Select "INPUT LEVEL".
Press the [C] or [D] key.
Press the [ENTER] key.
4 4
Adjust the Input Level.
Press the [A] or [B] key.
Press the [ENTER] key.
If you adjust the input level for AUX, the output level from the [AUX REC
OUT] terminal will also change.
External Components
You can adjust the input
level in a range from -3 to 5.
English
09.10.26 4:31:58 PM 09.10.26 4:31:58 PM
43