Removing A Cd - Kenwood C-707i-S Instruction Manual

Supported Media R Page 24
Related
Audio Settings R Page 63 onwards
Information
Selecting Track Program Playback Mode R Page 39
en03_c-707i.indd 31 en03_c-707i.indd 31
Cautions when loading a CD
– A CD cannot be loaded while the system is in Standby mode.
– Do not try to force a CD into the inlet slot while the system is in Standby mode.
Doing so can cause malfunction.
– If you experience problems loading a CD, pull it out and then re-insert it.
– Do not touch the playing surface of the disc.
– Use of an 8 cm CD adapter is not supported.
– If you insert an 8 cm CD so it is off center relative to the inlet slot, it will not slide
all the way into the slot. Take care when using an 8 cm CD.
– If a CD is already loaded, opening the slide door will eject it.

Removing a CD

1 1
Press the [F] key to stop playback.
2 2
Slide the slide door cover towards the back panel to eject
the CD.
Sliding the slide door will eject the CD.
If the CD is playing when you slide the slide door to the back panel, playback
will stop and the CD will be ejected.
3 3
Slide the slide door towards the front panel to close it.
A CD cannot be ejected while the system is in Standby mode.
Ejecting a CD deletes all program playback settings. (Page 39)
CD CD
31
English
12/19/2007 5:19:57 PM 12/19/2007 5:19:57 PM