Adjusting The External Component Input Level - Kenwood K-731-S Instruction Manual

Connecting Other Accessories (Commercially Available Units) R P.12, 13
Related Related
Audio Settings R P.51 onwards
Information Information
R-K731̲E.indb 47 R-K731̲E.indb 47

Adjusting the External Component Input Level

Use the procedure below to adjust the input level for the external
component connected to the [AUX PLAY IN] terminal.
Use this adjustment when the volume from an external component is
noticeably higher or lower than other input sources at the same vol-
ume setting.
1 1
Press the [AUX] key.
2 2
Press the [MODE] key.
3 3
Select "Input Level".
Press the [C] or [D] key.
Press the [ENTER] key.
4 4
Adjust the Input Level.
Press the [A] or [B] key.
Press the [ENTER] key.
Signals input via the [AUX PLAY IN] terminal will not be output from the
[AUX REC OUT] terminal.
External Components
You can adjust the
input level in a range
from -3 to 5.
47
English
2011/10/07 14:08:47 2011/10/07 14:08:47