Table of Contents
Advertisement
Name of Parts / Accessories
powder detergent inlet (P.20, 22)
liquid bleach inlet (P.20)
Washing/spinning tub (P.22)
Adjustable leg (P.24)
Operation panel
* In case foreign matter, water, or detergent is attached to the control panel, please power off the machine before wiping the panel
clean or you may encounter system error.
* Please touch center of key texts to operate the machine. (Do not use rubber gloved hands, fingernails, and pens to tap the touch
screen.)
* Once a desired cycle is set, press Start/Pause to lock keys from invalid behavior due to non-intentional tapping. To change settings,
press Start/Pause key before making any change.
* To change a reservation setup,
* Peel off the protective film before use.
Water level (P.7, 19)
Setting can be changed according
to your preference.
Press the [Water Level] key
repeatedly until the desired
water level indicator lights up.
4
Lid
Level (P.24)
Liquid detergent/
Balance ring
Lint filter (P.21)
Pulsator
power and set up again.
Cycle indicator
Running cycle is indicated
by flashing light.
Wash/rinse/spin
(P.7, 17)
You may also select custom cycle.
Tap the touch control panel
until indicator of desire cycle
lights up.
Water supply hose (HOT)
Water supply hose (COLD)
(P.22, 23)
Softener inlet
(P.20, 22)
Operation panel
(see below for refence)
Lint filter (P.21)
Power cord (P.24)
Display area
(P.7)
Super dry
Preset
(P.18)
(P.7)
Advertisement
Table of Contents
