Table of Contents
Advertisement
Error Code
Check the following if the washing machine keeps on beeping and show
message "U" and a number alternately.
If the problem persists, consult the service center for instructions.
Indication
Unable to drain
The lid is open
Unable to spin/
Super dry
Unable to supply
water
When there are too
many clothes
In case letter "H" and a number displays alternately, then the washing machine
requires maintenance services.
Indication
●
Check the water drain pipe for any of following problems:
– Is drainpipe crushed?
– Is the end of the water drainpipe immersed in water?
– Is the pipe raised somewhere more than 1.1 m?
– Is the pipe extended more than 2 meters?
– Is the pipe jammed somewhere?
→ Troubleshoot this problem before opening and closing
the lid to restart the washing machine.
●
Is the lid open?
→ Close the lid
●
Are the clothes out of balance?
→ Balance the load and close the lid.
●
Is the washing machine wobbling or placed on an uneven
surface?
→ Level the washing machine with adjustable leg, opening
and closing the lid to restart the washing machine.
●
Check for any of the following problems:
– Are the water faucets turned on?
– Is the water supply cut off?
– Is the water supply valve filter jammed?
→ Troubleshoot this problem before opening and closing
the lid to restart the washing machine.
●
The possibility of having too many clothes
- please check whether this are too many clother
Turn off the power; Sekct the desired cycle, restart the
operation.
●
Turn off the tap just to be safe. Please note down the 2-digit num-
ber after letter "H", disconnect the power plug, and call any service
center nearby.
Check points
Check points
Page
23
–
–
23-24
22
12
10
27
Advertisement
Table of Contents
