Table of Contents
Advertisement
About Detergent
1 Load clothes, press Start/Pause
key.
●
Displays water and detergent level
according to load. (P.19)
Powder
Powder
detergent
detergent
Note
●
Please read user guideline and precautions of
detergent, bleach, soap powder/strip carefully
beforehand.
●
Please select detergent of less foam.
●
Please keep liquid/powder detergent inlet dry.
Break up caked or solidified powders before adding
them in container, otherwise they may remain un-
dissolved.
●
Keep level of liquid detergent
and softener below the "MAX"
mark or they may overflow
immediately.
●
You may add liquid detergent
through either liquid/powder
detergent or liquid detergent/bleach inlet. For better
effect, the former inlet is recommended.
●
Contain powder bleach with white clothes before
adding in washing machine tub when reserve
20
Soap powder/strip
To dissolve soap powder/strip:
Fill any container with 5 L of water
at temperature around 30 °C.
Add soap powders/strips in it slowly
and churn dissolving them.
MAX
2 Add detergent according to water
level and existing detergent.
(See diagram below for detergent adding
location)
Pre wash Detergent
Powder
Powder
bleach
bleach
function is used. Otherwise, you may fade other
clothes.
Softener:
●
Final round of the rinse cycle will add softener
automatically.
●
Softener tends to solidify after exposed to air for
more than 12 hours. Try avoid using it this way.
Soap powder/strip:
●
Dissolve soap powder/strip in water before use,
otherwise it may cake and stick to clothes.
●
Rinse cloths thoroughly after washing with soap
powder/strip, otherwise they may be tinted yellow or
left with soap odor.
●
Do not over or direct add cold water, as partially
dissolved soap or soap scums attached to water
pipe or in washing machine tub may float out and
stain your clothes.
Liquid
Liquid
detergent
detergent
Liquid
Liquid
bleach
bleach
Softener
Softener
Input Box
Advertisement
Table of Contents
