La Crosse Technology 328-10618 Instruction Manual page 17

1. Hold the EXTRA SENSOR button
2. Install batteries in the sensor
3. Press TX button
4. Allow up to 3 minutes to connect
5. Scan sensor bar code ID
Station normal display-Pressure showing
Delete Extra Sensors from your station:
1. Press and release the EXTRA SENSOR button until you see the sensor and ID you wish to delete.
2. Hold the MINUS (-) button for 3 seconds to delete this sensor. The sensor readings and ID will show
dashes.
3. Sensor will no longer show in the Extra Sensor area.
Press and release the EXTRA SENSOR button to view Pressure, and any Extra Sensors connected to your
station.
Wi-Fi Professional Station
-
AA
+
AA
EXTRA SENSOR
Sensor Barcode ID
Insert Batteries
TX Button
Water Leak sensor added
EXTRA SENSOR
Page | 17