Table of Contents
Advertisement
Basic operations
●
Color temperature setting (COLOR
TEMP)
1
Press the [EXIT] button and the [ATW] button of
[WHITE BAL] simultaneously.
The [A], [B], and [ATW] buttons of [WHITE BAL] light,
and color temperature setting mode is enabled.
The color temperature setting value appears on the LCD
screen during this time.
2
Turn the F1 dial to change the color
temperature.
Press the [A], [B], and [ATW] buttons of [WHITE BAL] to
return to the mode of the selected button.
The mode will switch from the color temperature mode to
the original mode after a specific amount of time passes.
To configure the color temperature setting again, press
the [EXIT] button and the [ATW] button of [WHITE BAL]
simultaneously.
●
Preset speed table setting (PRESET
SPEED)
1
Press the [MENU] button on the AW‑RP120.
The [MENU] button lights.
2
Press the FUNCTION menu [23] button.
The button lights, and the OPTION menu appears on the
LCD panel.
3
Turn the F1 dial to select "PRESET SPEED",
then press the F1 dial.
"Slow" or "Fast" appears on the bottom right (F2 area) of
the LCD panel.
4
Turn the F2 dial to select "Slow" or "Fast", then
press the F2 dial.
30
(continued)
●
Freezing images during preset playback
(FREEZE DURING)
1
Press the [MENU] button on the AW‑RP120.
The [MENU] button lights.
2
Press the FUNCTION menu [23] button.
The button lights, and the OPTION menu appears on the
LCD panel.
3
Turn the F1 dial to select "FREEZE DURING",
then press the F1 dial.
"Off" or "On" appears on the bottom right (F2 area) of the
LCD panel.
4
Turn the F2 dial to select "Off" or "On", then
press the F2 dial.
Off: Do not freeze the current preset playback images.
On: Freeze the current preset playback images.
●
Optical image stabilization function
setting
1
Press the [MENU] button on the AW‑RP120.
The [MENU] button lights.
2
Press the FUNCTION menu [23] button.
The button lights, and the OPTION menu appears on the
LCD panel.
3
Turn the F1 dial to select "I.S.", then press the
F1 dial.
"Off", "MODE_1" or "MODE_2" appears on the bottom
right (F2 area) of the LCD panel.
4
Turn the F2 dial to select "Off", "MODE_1" or
"MODE_2", then press the F2 dial.
Off:
Image stabilization function not used.
MODE_1: Image stabilization function used (optical,
2-axis compensation)
MODE_2: Image stabilization function used
(optical+electronic, 4-axis compensation)
Advertisement
Table of Contents
