International Wash Code Symbols - Zanussi ZWG6120 P User Manual

Altering an option or a running program
It is possible to change any option before the
program carries it out. The option "Quick Wash
( )" cannot be modified after the Start/Pause
has been pressed.
Changing a running program is possible only
by resetting it. Turn the program selector dial
to "O" and then to the new program position.
The washing water in the tub not be emptied
out. Start the new program by depressing the
"Start/Pause ( )" button again.
Interrupting a program
Depress the "Start/Pause (
interrupt a program which is running, the
corresponding light starts to flash. Depress the
button again to restart the program.

International wash code symbols

These symbols appear on fabric labels, in order to help you choose the best way to treat your laundry.
Energetic wash
Max.wash
temperature
95 °C
Delicate wash
Bleaching
Ironing
Hot iron max 200°C
Dry cleaning Dry cleaning
in all solvents
Drying
Opening the door after the program
has started
If you need to open the door, you must first set
the washing machine to PAUSE by pressing
the Start/Pause (
need to wait about 2-3 minutes to release
door lock.
If the machine is already heating or the water
level is above the bottom edge of the door or
that the drum is turning. In this case the door
can not be opened.
If you can not open the door but you need to
open it you have to switch the machine off by
)" button to
turning the selector dial to "O". After about 3
minutes the door can be opened (pay attention
to the water level and temperature!).
Max.wash Max.wash
temperature temperature
60 °C 40 °C
l B a e h c n i o c d l w t a r e
Warm iron max 150°C
Dry cleaning in perchlorethylene,
petrol, pure alcohol, R 111 & R 113
) button, after that you
Max.wash
temperature
30 °C
Hand wash
D o n t o l b a e h c
Lukewarm iron max 110°C
Dry cleaning in petrol,
pure alcohol and R 113
high
temperature
low
temperature
Tumble dry
Do not wash
at all
Do not iron
Do not
dry clean
Do not
tumble dry
15