Table of Contents
Advertisement
These resolutions are only available in the main camera.
Add to
album—Select whether you want to save the image
to a certain album in the gallery. If you select Yes, a list of
available albums opens.
Show captured
image—Select
captured image after it is taken, or
continue taking pictures immediately.
Default image
name—Define the default name for the
captured images.
Extended digital zoom
(main camera
(continuous)
allows the zoom increments to be smooth
and continuous between digital and extended digital
zoom,
On (paused)
allows the zoom increments to pause
at the digital and extended digital step point, and
allows a limited amount of zoom while retaining the image
resolution.
Capture
tone—Select the tone you want to hear when you
take a picture.
Memory in
use—Select where to store your images.
Restore camera
settings—Select
values to the camera settings.
Flash
The flash is available only in the main camera.
On
if you want to see the
Off
if you want to
only)—On
Off
Yes
to return the default
Keep a safe distance when using the flash. Do not use the
flash on people or animals at close range. Do not cover the
flash while taking a picture.
The camera has an LED flash for low light conditions. The
following flash modes are available for the still image
camera:
Automatic
(
),
R. eye redu.
Off
(
).
To change the flash mode, in the active toolbar, select the
desired flash mode.
Adjust color and lighting
To enable the camera to reproduce colors and lighting
more accurately, or to add effects to your pictures or
videos, use the scroll key to scroll through the active
toolbar, and select from the following options:
White
balance—Select the current lighting condition from
the list. This allows the camera to reproduce colors more
accurately.
Exposure compensation
(images only)—If you are
shooting a dark subject against very light background such
as snow, adjust the exposure to +1 or even +2 to
compensate the background brightness. For light subjects
against dark background, use -1 or -2.
Flash
mode—Select the desired flash mode. See 'Flash', p.
45.
(
),
On
(
), and
45
Advertisement
Table of Contents
