Advertisement
Notes on Use - for correct operation of the Product-
(
Express5800
PCI
PCI
RAID
Note the following when you use this product. If you ignore the notes, your assets (including
important data and/or other devices) may be damaged.
This product is the PCI device for connecting the Serial-Attached SCSI(SAS) devices and
Serial-ATA(SATA)devices with the Express5800 series. You can not use for the other
purpose.
This product is an extremely sensitive electronic device. First make your body contact
with metallic frame of the server to discharge static electricity from your body before
handling this product. Hold an edge of the controller in handling this product. Do not touch
the parts or the components to a connector. Do not drop this product. Do not make this
product hit against other objects.
This product can connect the hard disk drive or the solid state drive(here after called
Physical Device) of identical standard.
For the supported system, additional HDD cage and Physical Device, ask your sales
representative.
This product may be limited for the simultaneous use with the other PCI devices (the
other RAID Controller, the mirroring board, the SCSI controller). For details on the
simultaneous use with the other PCI device, ask your sales representative.
Please turn off a power supply of a cellular phone near the serve in which this product is
built-in. A radio wave causes a malfunction.
Importer EU Contact: NEC Nederland B.V. Olympia 4, 1213 NT Hilversum, The Netherlands
Korean KC Statement
B
(
(B
)
.
Certification No
Basic Model Number of Equipment
Applicant
Equipment Name
Manufacturer
Country of Origin
Instructions accessoires
Le contrôleur RAID est le périphérique PCI pour connecter le Serial-Attached SCSI (SAS)
dispositifs et Serial-ATA (SATA) dispositifs à la série Express5800. Vous ne pouvez pas utiliser
l'autre but.
)
Serial-Attached SCSI SAS
Serial-ATA SATA
HDD
SCSI
PCI
PHS
)
,
: MSIP-REM-A8T-50008
MSIP-REM-A8T-50011
: 50008
50011
: Avago Technologies, Inc.
: Add-in card
: Avago Technologies, Inc.
:
,
,
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1)This device may not cause harmful interference, and (2) this device must accept any
interference received, Including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
connected.
Industry Canada Class B Emission Compliance Statement/
Avis de conformité à la réglementation d'Industrie Canada
CAN ICES-3(B)/NMB-3(B)
OFF
India
This product is RoHS compliant.
This Manual
Windows
The guide is intended for persons who are familiar with operating systems including Windows and
fundamental operations of general-purpose I/O devices including the keyboard and mouse.
Signage
The following signage are used throughout this User's Guide. For safety symbols, see "SAFETY
INDICATIONS" provided earlier.
Items to be observed or points to be noted when operating the
product.
Items to be checked when operating the product
Information useful or convenient for you
antenna.
equipment and receiver.
a circuit different from that to which the receiver is
radio/TV technician for help.
Advertisement
