Advertisement
Power Supply and Power Cord Use
ON
Disconnect the power cord(s) before installing or removing the
product in/from the server.
AC
Make sure to power off the server and disconnect the power cord(s) from
a power outlet before installing/removing the product in/from the server,
or connecting with the peripheral devices. All voltage is removed only
when the power cords are unplugged.
Do not use any damaged cable.
Make sure the cable condition before connection. Using the damaged
connector, bent connector pin, or dirty connector may cause a fire due to
short-circuit.
Do not hold the power plug with a wet hand.
Do not disconnect/connect the plug while your hands are wet. Failure to
follow this warning may cause an electric shock.
Do not pull the cable when disconnecting the power cord.
When disconnecting the power cord from the server, hold the plug and
pull it straight out. Pulling the cord out by the cable portion could damage
the cable to result in an electrical shock hazard or a fire.
Installation, Relocation, Storage, and Connection
Do not connect any interface cable with the power cord of the
server plugged to a power source.
Make sure to power off the server and unplug the power cord from a
power outlet before connecting/disconnecting any interface cable to/from
the server. If the server is off-powered but its power cord is plugged to
a power source, touching a cable or connector may cause an electric
shock or a fire resulted from a short circuit.
Do not use any unauthorized interface cable.
Use only interface cables authorized by NEC and locate a proper device
and connector before connecting a cable. Using an unauthorized cable
or connecting a cable to an improper destination may cause a short
circuit, resulting in a fire.
Also, observe the following notes on using and connecting an interface
cable.
Do not step on the cable.
Do not place any object on the cable.
Do not use the server with loose cable connections.
Do not use any damaged cable connector.
Make sure the cable is securely locked with screw.
CAUTION
AC
CAUTION
OFF
NEC
Do not use or store the product in the place where corrosive gases
exist.
Make sure not to locate or use the server in the place where corrosive
gases (sulfur dioxide, hydrogen sulfide, nitrogen dioxide, chlorine,
ammonia, ozone, etc) exist.
Also, do not install it in the environment where the air (or dust) includes
components accelerating corrosion (ex. sulfur, sodium chloride) or
conductive metals. There is a risk of a fire due to corrosion and shorts of
an internal printed board.
Consult with your service representative for the location appropriate to
the server.
Avoid installation in extreme temperature conditions.
OFF
/
Immediately after the server is powered off, its internal components such
as hard disk drives are very hot. Leave the server until its internal
components fully cool down before installing/removing any component.
Cleaning and Working with the Product
Do not disassemble, repair, or alter the server.
Never attempt to disassemble, repair, or alter the product on any
occasion. Failure to follow this instruction may cause an electric shock or
fire as well as malfunctions of the product.
Disconnect the power plug before accessing inside the server.
Make sure to power off the server and disconnect the power plug from a
AC outlet before accessing inside the server. Touching any internal
device of the server with its power cord connected to a power source
may cause an electric shock even if the server is off-powered.
Make sure to complete installation.
DC
Always connect the DC cable and/or interface cable firmly. An
incompletely connected cable may cause a contact failure, resulting in
smoking or fire.
During Operation
Avoid contact with the server during thunderstorms.
If it starts thundering, do not touch any part of the server containing the
product. Failure to follow this warning may cause an electric shock.
Keep animals away from the server.
Keep animals away from the server containing the product.
Pet's discharges or fur may enter the server and cause a fire or electric
shock.
CAUTION
WARNING
.
OFF
AC
OFF
CAUTION
CAUTION
Advertisement
