ViewSonic CDE5010 User Manual page 47

OSD Transparency
Adjust OSD transparency.
• {Off} - Transparency off.
• {1-100} - Transparency level 1-100.
Power Save
Mode 1 [TCP off, WOL on, auto off]
Mode 2 [TCP off, WOL on, auto on/off]
Mode 3 [TCP on, WOL off, auto on/off]
Mode 4 [TCP on, WOL off, no auto on/off]
Power save modes
Mode 1: DC off -> Power off. LED: Red.
Power Save -> Power off, LED: Red
Mode 2: DC off -> Power off, LED: Red.
Power Save -> Power Saving.
LED: Orange. Can be wake up.
Mode 3: DC off -> Back light off, LED: Red
Power Save -> Back light off,
LED: Orange. Can be wake up.
Mode 4: DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. show "no signal" only.
RCU Power
Button Off
Mode 1 [TCP off,
DC OFF
WOL on, auto off]
Mode 2 [TCP off,
WOL on, auto on/ DC OFF
off] (gary out)
Mode 3 [TCP off,
WOL off, auto on/ Backlight OFF
off]
Mode 4 [TCP off,
WOL off, no auto Backlight OFF
on/off]
* This product does not suppor t Mode 2
Following table is the action for Android board with different power mode.
DC off/on: press power button by RC
Power mode in OSD Mode 1/2
DC off shutdown
DC on Boot up
Android
No Signal WoL
(ARM)
DC OFF V ARM OFF
When signal is
back, system wake V ARM OFF
up
Backlight OFF X ARM OFF
Backlight ON,
X ARM OFF
show no signal
Mode 3/4
1. The cur rent source APK
(such as MediaPlayer,
Broswer, PDF or Smar
tCMS) will be closed.
2. Android system will go to
the default black launcher.
1. Android system reboots
38