Centrifugal Clutch - Coleman CT200U-EX V Owner's Manual

Centrifugal Clutch

Cleaning and lubrication
To help ensure the maximum life
out of the Centrifugal clutch. It is
important to clean and lubricate
the clutch after every 3 hours of
operation. To Clean and lubricate,
follow the instructions below
1. Make sure engine is not
running and that the engine and
clutch has had time to cool.
2. Remove clutch cover (1).
3. Wipe off Centrifugal clutch (2)
with a clean rag.
4. Lubricate Centrifugal clutch (2)
using the same type of motor oil
that is used in the engine. Place a
few drops of motor oil on the drive
shaft (3) where the clutch is at-
tached. Do not oil any other por-
tion of the clutch. DO NOT PLACE
ANY OIL IN THE LARGE HOLES IN
THE CLUTCH. THE HOLES ARE FOR
AIR CIRCULATION ONLY. DO NOT
OIL THE INSIDE OF THE CLUTCH.
5. RE-INSTALL THE CLUTCH COVER
BEFORE STARTING OR OPERATING
THE MINI BIKE.
WARNING
!
Performing maintenance and
inspection on the centrifugal clutch
while the engine is running could be
hazardous.
Performing maintenance and
inspections on the centrifugal clutch
while the engine is running could
result in getting body parts or cloth-
ing caught in moving parts, or could
result in touching hot items which
could result in severe injury.
MAINTENANCE
Shut off engine and allow to cool
before performing maintenance
and inspection on the centrifugal
clutch.
!
Operating the mini bike without
the clutch cover in place could be
Hazardous.
Operating the mini bike without the
clutch cover could result in getting
body parts or loose clothing caught
in moving parts which could result in
severe injury.
Never Start or operate the mini bike
without the clutch cover in place.
24
1
2 3
WARNING