Cleaning; Cleaning The Ink-Jet Head; Cleaning The Micr Head - Epson TM-S2000 Series Technical Reference Manual

Cleaning

Cleaning the Ink-Jet Head

When printing on cut sheet paper becomes faint or uneven, the ink-jet head may need to be
cleaned.
The cleaning process uses some ink. Do not run cleaning when it is unnecessary.
To start the ink-jet head cleaning, press the cleaning button on the control panel for 3 seconds or
more. During the cleaning, Power LED flashes.
When Power LED comes on after flashing, the ink-jet head cleaning is completed.

Cleaning the MICR Head

When the MICR head becomes dirty, the product cannot read the magnetic ink characters
normally.
Clean the MICR head every 6 months or every 100,000 passes by setting the following cleaning
sheet in the same way as cut sheet paper. (See
• KIC Team, Inc. "Waffletechnology
• KIC Team, Inc. "Epson Check Scanner Cleaning Kit" (Model: KWEPS-KCS2)
Use a cleaning sheet only one time; then discard it.
 It is recommended to clean the MICR head once per week or once every 2,000 sheets
 It is recommended to clean the scanner after cleaning the MICR head.
66
®
cleaning card" (CS1B15WS)
for good reading results.
"Inserting Cut Sheet Paper" on page 62.)