Recoverable Errors - Epson TM-S2000 Series Technical Reference Manual

Recoverable Errors

Processing is no longer possible when recoverable errors occur. They can be recovered easily by
sending an error recovery command from the driver after eliminating the cause of the error.
Error
Mechanism
position error
Cut sheet paper
jam error
Cut sheet paper
feed error
26
Error description
The home position of the
hopper or the pocket
switching board cannot
be detected.
· The check is not ejected
after feeding a specified
amount of paper.
· Feeding from the ASF
failed.
· A cut sheet paper/card
jam was detected.
· Too short/long paper
was detected.
· Double feeding of cut
sheet paper occurred.
· Cut sheet paper was
inserted upside down or
back to front.
· Selected that incorrect
cut sheet paper feeding
to cause an error in
confirmation mode.
· Data that is longer than
the length of the cut
sheet paper was
specified.
· Noise was detected
during MICR reading.
Error LED flash code
Approx.320 ms
Recovery measure
Recovers with a
command after the
error cause is
eliminated.
Recovers with a
command after the
error cause is
eliminated.
Recovers with a
command after the
error cause is
eliminated.