Greenlee 93-70 Operating, Maintenance And Safety Instructions page 3

FEATURES (Fig. 1)
• Digital Display - 3-1/2 digit LCD read-out, 1999 maximum reading; indicates AC voltage and
current, DC voltage and current, resistance, frequency, diode, continuity, temperature and
phase sequence. Also indicates overload (OL), low battery (BAT) and automatic polarity. (A)
• Power Switch - Turns unit on and off. (B)
• Display Hold (D-H) - Captures a stable measurement and holds it on the display.* (C)
• Peak Hold - Displays maximum reading when testing AC voltage or current.* (D)
• Rotary Selector Switch - Selects function and test range. (E)
• Temperature Probe Connection - For K-Type probe connection for temperature measure-
ment. (F)
• V Input Terminal - For DC and AC voltage, resistance, frequency, diode, continuity and
phase sequence indicator (using Black Lead in T terminal). (G)
• COM Input Terminal - The ground input terminal or the input terminal for phase sequence
indicator (using yellow lead in S terminal). (H)
• mA, A Input Terminal - For current measurement, plus input terminal for phase sequence
indicator (using red lead in R terminal). (I)
• 10A Input Terminal - For current measurement above 200mA and below 10A, positive (+)
terminal. (J)
• Auto Off - Tester will automatically shut off after approximately 26 minutes.
* See Feature Usage in OPERATION section for information about using these features.
93-70 Digital Multi-Tester
GREENLEE Cat./UPC No. 93-70/00628
R S T
D–H
BAT
AC
D
J
I
Fig. 1
A
°C °F
P–H
MK
KHz
A
B
C
E
F
G
H
3