Advertisement
Quick Links
Owner's Guide and Installation Manual
Attach sales receipt to this card and retain as your proof of purchase
DATE OF PURCHASE:
MODEL NUMBER:
To register your fixture, please visit our website www.montecarlofans.com
14PRR52XXD Series Fan
ETL Model NO. : 14PRR52(X)
RETAILER NAME:
RETAILER ADDRESS:
10.38 kgs
22.84 lbs
Total fan weight with light
Advertisement
Related Manuals for Monte Carlo Fan Company Prairie 14PRR52 D Series
Summary of Contents for Monte Carlo Fan Company Prairie 14PRR52 D Series
- Page 1 Owner’s Guide and Installation Manual 14PRR52XXD Series Fan ETL Model NO. : 14PRR52(X) Attach sales receipt to this card and retain as your proof of purchase DATE OF PURCHASE: RETAILER NAME: RETAILER ADDRESS: MODEL NUMBER: To register your fixture, please visit our website www.montecarlofans.com 10.38 kgs 22.84 lbs Total fan weight with light...
-
Page 2: Cautions And Warnings
Note: Suitable for use in damp locations. Tools Required for Assembly (not included): Electrical Tape, Phillips Screwdriver, Pliers, Safety Glasses, Stepladder and Wire Strippers Customer Service 800-969-3347 Customer Service Center 7400 Linder Ave. Skokie, IL 60077 www.montecarlofans.com © 2018 Monte Carlo Fan Company 05/2018... - Page 3 Phillips screwdriver through the yoke and downrod ( don’t damage the lead wires ) as a guide and then push the cross pin and pull the screwdriver in the meantime as shown in the inset. © 2018 Monte Carlo Fan Company 05/2018...
- Page 4 The splices after being made should be turned upward and pushed carefully up into the outlet box. © 2018 Monte Carlo Fan Company 05/2018...
- Page 5 Twist clockwise till lock. Reinstall the screw removed in step 15. Tighten all screws securely. © 2018 Monte Carlo Fan Company 05/2018...
- Page 6 Lexan in light pan with grooves on the blanking shade and twist clockwise until tight. plate and twist clockwise until tight. Note: Do not install LED light kit if use blanking plate. © 2018 Monte Carlo Fan Company 05/2018...
-
Page 7: Transmitter Operation
Or you may turn power off for 15 seconds then turn power back, and then turn the fan on, Over load protection (current limit)- The device will limits the maximum current output from the receiver/drive when the fan or light load was increased abnormally. © 2018 Monte Carlo Fan Company 05/2018... - Page 8 4. When fan is turned on or operated forward/reverse function, it shutters & goes back & forth until it turns. It is a normal performance of this fan and it will take for few seconds to run this operation. © 2018 Monte Carlo Fan Company 05/2018...
-
Page 9: Troubleshooting
Trouble Shooting Warning Trouble Suggested Remedy CAUTION CAUTION CAUTION © 2018 Monte Carlo Fan Company 05/2018... - Page 10 May.2018...