Table of Contents
Advertisement
Available languages
Available languages
Bending Instructions (cont'd)
Offsets
1. Measure the height and length of the
obstruction. Select the angle to be used.
2. Refer to the X Table for the X dimension,
and refer to the Offset Table for the center-
to-center distance.
Note: If the center-to-center distance is
not shown, calculate it by using the multi-
pliers shown in the Offset Table.
3. Mark the conduit as shown.
4. Insert the conduit into the bender. Align
Bending Mark 1 with the front edge of the
hook and bend the conduit.
5. Without removing the conduit from the
bender, align Bending Mark 2 with the front
edge of the hook and rotate the conduit
180°. Make the second bend.
X Table
Conduit Size
X
1/2"
2-1/2
3/4"
3-1/16
1"
3-1/16
1-1/4"
4
1-1/2"
4-3/4
2"
4-3/4
Greenlee / A Textron Company
START OF BEND
BENDING
MARK 1
START OF BEND
BENDING
MARK 1
Offset Table
15°
Offset
Maximum
Conduit Size
to-Center
2
3/4
4
1-1/2
15-7/16
6
2
23-3/16
8
2
10
2
12
2
14
2
54-1/16
16
2
61-13/16
18
2
69-9/16
20
2
22
2
13
X
CENTER TO CENTER
X
Finished Angle
30°
Center-
Maximum
Center-
Conduit Size
to-center
7-3/4
3/4
7-15/16
1
11-15/16
30-7/8
1-1/2
15-15/16
38-5/8
2
19-15/16
46-3/8
2
23-15/16
2
27-15/16
2
31-15/16
2
35-15/16
77-1/4
2
39-15/16
85
2
43-15/16
4455 Boeing Dr. • Rockford, IL 61109-2988 USA • 815-397-7070
854 Quad Bender
BENDING
MARK 2
BENDING
MARK 2
45°
Maximum
Center-
Conduit Size
to-Center
1/2
8-5/16
1
11-1/16
1-1/4
13-13/16
1-1/2
16-5/8
2
19-7/16
2
22-1/4
2
25-1/16
2
27-15/16
2
30-3/4
Hide quick links:
Advertisement
Chapters
Table of Contents
