Optimizing the image
Select the Display Mode
The projector is preset with several predefined picture modes so that you can choose one
to suit your operating environment and input signal picture type.
To select an operation mode that suits your need, you can follow one of the following
steps.
Go to Settings > Display Mode
Press up / down to select a desired mode.
Press OK when finished.
Display Mode
Harman Kardon - Adjusting the audio settings
The sound adjustments made as below will have an effect on the projector speaker.
Muting the Sound
Go to Settings > Harman Kardon > MUTE
Press < / > to adjust ON / OFF.
Press OK when finished.
If available, you can press
and off.
Adjusting the Sound level
Go to Settings > Harman Kardon > Audio Volume
Press < / > to adjust volume, volume can be adjusted from 0 to 20.
Press OK when finished.
If available, you can press
Maximizes the brightness of the projected image.
This mode is suitable for environments where high
Brightest
brightness is required, such as using the projector in
well lit rooms.
Displays images in standard levels of contrast,
Standard
brightness, and sharpness.
Theater
Optimizes the image for movie.
on the remote control to toggle the projector audio between on
or
on the remote control to adjust the projector's sound level.
Mode
24