AV Access 4KSP14-D User Manual

4k hdmi splitter 1x4

Advertisement

Quick Links

4KSP14-D
4K HDMI Splitter 1x4
User Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4KSP14-D and is the answer not in the manual?

Questions and answers

Summary of Contents for AV Access 4KSP14-D

  • Page 1 4KSP14-D 4K HDMI Splitter 1x4 User Manual...
  • Page 3 AV Access Technology Limited assumes no responsibility for any inaccuracies that may be contained in this document. AV Access Technology Limited also makes no commitment to update or to keep current the information contained in this document.
  • Page 4 Important Safety Instructions Do not expose this device to rain, moisture, dripping or splashing. No objects  filled with liquids, such as vases, shall be placed on the device. Do not install or place this unit in a bookcase, built-in cabinet, or in another ...
  • Page 5: Table Of Contents

    Table of Contents Introduction ......................2 Overview ..........................2 Features ............................ 2 Package Contents ........................3 Panel ............................4 Front Panel........................4 Rear Panel ........................5 Installation and Application................. 6 Brackets Installation ..................... 6 Brackets Installation ......................6 Steps to install the device in a suitable location ..........6 Application ..........................
  • Page 6: Introduction

    Introduction Overview 4KSP14-D is a 1x4 splitter for HDMI with Ultra HD 4K support. It reliably distributes one HDMI source signal to as many as four HDMI outputs. It supports HDMI 1.4a specification features including data rates up to 10.2Gbps, 12-bit Deep Color, 3D, Lip Sync, and HD lossless Audio/Video formats.
  • Page 7: Package Contents

    Introduction Package Contents Before you start the installation of the product, please check the package contents: Splitter 4KSP14-D x 1  Power Adapter (DC 5V 1A) x 1  Mounting Brackets (with Screws) x 2  User Manual x 1 ...
  • Page 8: Panel

    Introduction Panel Front Panel Name Description ON: The corresponding numbered output is connected to HDMI Out a display device. LED 1/2 OFF: No display device is connected. ON: Both source device and display device are connected. HDMI In LED OFF: Only source is connected but no display device, or no source device is connected.
  • Page 9: Rear Panel

    Introduction Rear Panel Name Description DC 5V Connects to DC 5V 1A power adapter provided HDMI In Connects to an HDMI source device HDMI Out1~4 Connects to HDMI display devices www.avaccess.com services@avaccess.com...
  • Page 10: Installation And Application

    Installation and Application Installation and Application Brackets Installation Brackets Installation Note: Before installation, please ensure the device is disconnected from the power source. Steps to install the device in a suitable location Attach the installation bracket to the enclosure using the screw that were provided in the package separately.
  • Page 11: Application

    Brackets Installation Application Please refer to the following steps to install. Note: Please use the power adapter provided, otherwise the device may be damaged. www.avaccess.com services@avaccess.com...
  • Page 12: Edid Management

    The source device then produces a signal with the optimum resolution that is compatible with the output device. The 4KSP14-D supports EDID mixing function. When connected to multiple monitors, the device will compare the EDID of all displays and output the minimum timing.
  • Page 13: Specification

    Specification Specification Technical Input/Output Signal Type HDMI 1.4a, 3D, DVI 1.0, HDCP 1.4 4096 x 2160@24Hz, 3840 x 2160@30Hz, Input/Output Resolution 1920 x 1080@30/60Hz, 1280 x 720@60Hz, Supported 720 x 576@30/60Hz, 640 x 480@30/60Hz Stereo, PCM 2.0/5.1/7.1, Dolby True HD and Audio Format DTS HD Master Audio Maximum Data Rate...
  • Page 14: Trouble Shooting

    Trouble Shooting Trouble Shooting Steps of Regular Troubleshooting Routine Power: Please make sure all devices are powered on. (Source, splitter, display  devices). Please use the power adapter provided, otherwise the device may be  damaged. Indicator: Please make sure LED indicators of the splitter are normal according to user manual.
  • Page 15: Warranty

    The warranty has expired. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
  • Page 16 AV Access Technology Limited V1.0.5...

Table of Contents