1:2 splitter for hdmi with ultra hd 4k support (10 pages)
Summary of Contents for AV Access 4KSP12-P
Page 1
4KSP12-P HDMI 2.0 Splitter 1 x 2 User Manual...
Page 2
Disclaimers The information in this manual has been carefully checked and is believed to be accurate. AV Access Technology Limited assumes no responsibility for any infringements of patents or other rights of third parties which may result from its use.
Page 3
Important Safety Instructions Do not expose this apparatus to rain, moisture, dripping or splashing. No objects filled with liquids, such as vases, shall be placed on the apparatus. Do not install or place this unit in a bookcase, built-in cabinet, or in ...
Overview Overview 4KSP12-P is a 1x2 HDMI splitter for HDMI 2.0 with 4k@60Hz 4:4:4 8 bit which reliably distributes one HDMI source signal to 2 HDMI displays. It also provides auto EDID management and HDCP management which authenticates HDCP encryption between all devices, ensuring the HDMI source reliably outputs correct content for display.
Overview Package Contents Before you start the installation of the product, please check the package contents: 1 x 4KSP12-P Splitter 1 x Power Supply (DC 12V 0.5A) 1 x User Manual www.avaccess.com...
Overview Front Panel ID Name Description ON: The splitter is on. Power LED OFF: The splitter is off. ON: HDMI source is connected to the splitter. HDMI In OFF: No HDMI source is connected to the splitter. ON: HDMI display is connected to the splitter. HDMI Out OFF: No HDMI display is connected to the splitter.
Overview Rear Panel Name Description 12V DC power input, threaded port for DC 12V standard or locking connection HDMI Out1 Connects to HDMI display device HDMI In Connects to HDMI source device HDMI Out2 Connects to HDMI display device www.avaccess.com...
EDID Management EDID Management EDID (Extended Display Identification Data) is data generated from each display in the system to communicate the capabilities of the device. About Smart EDID function: Splitter is built-in 5 EDID: 4K@60Hz 4:4:4 HDR; 4K@60Hz 4:2:0 HDR; 4K@30Hz 4:4:4 HDR; 1080P@60Hz 2ch and 720P@60Hz 2ch.
Page 10
EDID Management Then, switching a 4K source to 1080P TV, the splitter will automatically output 1080P signal to 1080P TV. Finally, switching the 4K source to 4K TV and 1080P TV, the splitter will automatically output 1080P signal to both 4K TV and 1080P TV. www.avaccess.com...
Installation Instructions Installation Instructions Using a quality HDMI cable, connect an HDMI source (such as Blu-ray, games console, satellite/cable TV, media server etc.) to the HDMI IN port of the splitter. Note: Ensure power supplies are disconnected from all devices before installation.
Specification Specification Technical Input 1 x HDMI In (Type A female connector) Output 2 x HDMI Out (Type A female connector) Input / Output Signal HDMI 2.0 with 4K@60Hz 4:4:4 8bit Type VESA: 800x600@60Hz, 1024x768@60Hz, 1280x768@60Hz, 1280x800@60Hz, 1280x960@60Hz, 1280x1024@60Hz, 1360x768@60Hz, 1366x768@60Hz, 1440x900@60Hz, 1600x900@60Hz, 1600x1200@60Hz, 1680x1050@60Hz, Input / Output...
Page 14
Specification General Operating Temperature 0 to 45°C (32 to 113 °F) Storage Temperature -20 to 70°C (-4 to 158 °F) Humidity 10% to 90%, non-condensing Power Supply DC 12V 0.5A Power Consumption 3.7 W (Maximum) Human-body Model: ESD Protection ±8kV(Air-gap discharge)/ ±4kV(Contact discharge) Device Dimensions 126mm x 15mm x 70.2mm...
The warranty has expired. The defects are caused by the fact that the product is repaired, dismantled or altered by anyone that is not from an AV Access Technology Limited authorized service partner. The defects are caused by the fact that the product is used or handled improperly, roughly or not as instructed in the applicable User Guide.
Need help?
Do you have a question about the 4KSP12-P and is the answer not in the manual?
Questions and answers