Greenlee 560XL Instruction Manual page 5

Fiber optic power meter 850/1300 nm led source 1310/1550 nm laser source
Table of Contents

Advertisement

Important Safety Information
The 580XL instrument is a laser device conforming to the require-
ments of CDRH, CFR 1040, Subchapter J. While there is no potential
for eye damage due to unaided direct exposure, users should always
avoid looking directly into the output port. The use of optical viewing
instruments, such as microscopes, magnifiers, etc., should always be
avoided. The use of such devices around active fibers can focus an
intense beam of light energy onto the retina of the eye, which can
result in permanent damage.
Laser hazard:
• When performing measurements on fiber optic systems, avoid
eye exposure to any open-ended fibers, optical connectors,
optical interfaces, or other sources because they may be con-
nected to active laser transmitters.
• Do not look into the optical port when a source is turned on.
• Avoid looking at the free end of a test fiber, i.e., the end not
connected to the instrument. If possible, direct the free end
toward a non-reflective surface.
Failure to observe these precautions may result in injury.
Electric shock hazard:
Contact with live circuits could result in
severe injury or death.
CAUTION
LASER LIGHT
DO NOT STARE INTO BEAM
CLASS I LASER PRODUCT
560XL • 570XL • 580XL
5

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

570xl580xl

Table of Contents