Cleaning Instructions - Greenlee 46053 Instruction Manual

Changing the Battery or Cord Set
1. Disconnect the unit from the circuit.
2. Remove the two cover screws and the cover.
3. Replace the battery or cord set as shown. Observe polarity.
4. Replace the cover and screws.
Screw
Black Wire

Cleaning Instructions

Periodically wipe the case with a damp cloth and mild detergent.
Do not remove the cover while the test set is connected to a
circuit.
Electric shock or damage to the test set can result.
Red Wire
9V ALKALINE
A Positive or Tip (Black)
B Negative or Ring (Red)
C Ground Start Wire (optional)
46053
Screw
9