Operation; Dialing Features - Greenlee 46053 Instruction Manual

Operation

TALK
Press once to select Talk mode. Press repeatedly to alternate between the Talk and Monitor
modes.
MONITOR
Press once to select Monitor mode. Press repeatedly to alternate between the Monitor mode
and off.
Note: When in the Monitor mode, the test set will monitor the line until the test set is
disconnected or until another mode is selected. The Monitor mode shuts off approximately
one minute after disconnecting.
MUTE
Press and release to stop transmitting over the line or to eliminate sidetones. Press and
release again to talk.

Dialing Features

PULSE
Pulse Dialing
Connect the 46053 to the line. Press PULSE, then press TALK to go off-hook. Press
change to tone dialing.
Note: The 46053 will default to tone dialing after the line is disconnected.
FLASH
Flash
Press FLASH once momentarily to flash the line.
6
to