Table of Contents
Advertisement
Expansion Slot
Riser Card CRS101E:
Š 1 x PCIe x16 slot (Gen4 x16), Full height half-length
Riser Card CRS101E:
Š 1 x PCIe x16 slot (Gen4 x8 or x16), shared with OCP 2.0, Full height half-length
Internal Riser Card CRS101H:
Š 1 x PCIe x16 slot (Gen4 x16), Full height half-length
Š 1 x OCP 3.0 mezzanine slot with PCIe Gen4 x16 bandwidth
Š 1 x OCP 2.0 mezzanine slot with PCIe Gen3 x0 or x8 bandwidth, shared with
NOTE:
1. GIGABYTE offers an optional riser card to support full bandwidth PCIe Gen4
2. Contact GIGABYTE sales rep or technical support for more details about
Storage
Š 4 x 3.5/ 2.5" SATA/ SAS hot-swappable SSD bays
Š 1 x M.2 slot:
NOTE:
SAS card is required for SAS devices support
Internal I/O
Š 1 x M.2 slot
Š 1 x USB 3.0 header
Š 1 x COM header
Š 1 x TPM header
Š 1 x OCP 3.0 mezzanine slot
Š 1 x OCP 2.0 mezzanine slot
Š 1 x Front panel header
Š 1 x HDD back plane board header
Š 1 x PMBus connector
Š 1 x IPMB connector
Š 1 x Clear CMOS jumper
Š 1 x BIOS recovery jumper
( Please see NOTE below)
CRS101E ( Please see NOTE below)
x16 and OCP 2.0 Gen3 x8
supporting full bandwidth
- M-key
- PCIe Gen4 x4
- Supports NGFF-2280/22110 cards
- 13 -
Hardware Installation
Advertisement
Table of Contents
