Setting The Bluetooth Standby Mode; Turning On Or Off The Bluetooth Signal - Sony MHC-V21 Operating Instructions Manual

Hint
LDAC is an audio coding technology
developed by Sony that enables the
transmission of High-Resolution (Hi-Res)
Audio content, even over a BLUETOOTH
connection. Unlike other BLUETOOTH
compatible coding technologies
such as SBC, it operates without any
down-conversion of the Hi-Res Audio
1)
content , and allows approximately
three times more data
other technologies to be transmitted
over a BLUETOOTH wireless network
with unprecedented sound quality, by
means of efficient coding and optimized
packetization.
1)
Excluding DSD format contents.
2) In comparison with SBC (Subband
Coding) when the bitrate of 990 kbps
(96/48 kHz) or 909 kbps (88.2/44.1 kHz)
is selected.
Setting the BLUETOOTH
standby mode
The BLUETOOTH standby mode
enables the system to turn on
automatically when you establish
a BLUETOOTH connection from a
BLUETOOTH device.
1
Press OPTIONS.
2
Press / repeatedly to select
"BT STBY", then press
3
Press / repeatedly to select
the setting, then press
"ON": The system turns on
• •
automatically even when the
system is in standby mode.
"OFF": Turns off this function.
• •
To exit the options menu, press
OPTIONS.
2)
than those
.
.
Turning on or off the
BLUETOOTH signal
You can connect to the system
from a paired BLUETOOTH device
in all functions when the system's
BLUETOOTH signal is set to on. The
BLUETOOTH signal is turned on by
default.
Hold down + and MEGA BASS
on the unit for about 3 seconds.
"BT ON" or "BT OFF" appears on the
display.
Note
You cannot perform the following
• •
operations when BLUETOOTH signal is
set to off:
— Pair and/or connect with BLUETOOTH
device
— Use "Sony | Music Center"
— Change the BLUETOOTH audio
codecs
If you touch the N-Mark on the unit with
• •
an NFC-compatible BLUETOOTH device
or set the BLUETOOTH standby mode to
on, the BLUETOOTH signal will be set to
on automatically.
29
US