Enjoying Wireless Playback; Function) - Sony MHC-V21 Operating Instructions Manual

Note
If the Wired Party Chain function is not
deactivated after a few seconds, hold
down PARTY CHAIN on the Party Host
again for 2 seconds or more.
Setting the Wired Party Chain
sound mode
You can set the sound mode when
the Wired Party Chain function is
activated.
1
Press OPTIONS.
2
Press / repeatedly to select
"P CHAIN MODE", then press
3
Press / repeatedly to select
the mode you want, then press
.
"STEREO": outputs the stereo
• •
sound.
• • "RIGHT CH": outputs the
monaural sound of the right
channel.
"LEFT CH": outputs the monaural
• •
sound of the left channel.
To exit the options menu, press
OPTIONS.
Enjoying wireless
playback using
multiple systems
(Wireless Party Chain

function)

You can connect multiple audio
systems in a chain via BLUETOOTH
connection if all the systems are
equipped with the Wireless Party
Chain function. This function allows
you to create a more exciting party
environment and to produce higher
sound output without a cable
.
connection.
Note that you can only play back
audio source from a BLUETOOTH
device.
The first system in the chain to be
activated becomes the Party Host
and shares the music. Other systems
become Party Guests and play the
same music as that being played by
the Party Host.
Setting up and enjoying the
Wireless Party Chain
Example: Setting the MHC-V21 as the
first system (Party Host)
1
Turn on all the systems.
2
Set the first system as the Party
Host.
 Press BLUETOOTH on the unit to
select the BLUETOOTH function.
 Connect the BLUETOOTH device
to the system via BLUETOOTH
connection.
37
US