Advertisement
PHASE 1 – ASSEMBLY
1.2 LADDER RACK ASSEMBLY
1.2.1 Peel the backer off of the adhesive on the hook protector, then attach the hook protector
to the upper rear hook.
2×
1.2.2 Attach the rear hooks to the ladder clamps, with the pre-assembled hardware on the pivot bars.
For technical support, contact us at 1-800-565-5321
TOOLS
q Knife
REMOVE
TOOLS
q Cordless Impact
q 1/2" Socket
q 1/2" Wrench
HARDWARE USED
4×
hardware is pre
1525-PC Installation Guide | REV. B2 | Page 6
-
.
assembled
#90-225 Hex Bolt
5/16" - 18 × 2" SS304
#98-117 Flat Washer
#98-117 Flat Washer
#94-111 Lock Nut
Advertisement
