Product-Specific Problems - Dell E1715SE User Manual

Product-Specific Problems

Specific Symptoms
Screen image is too
small
Cannot adjust the
monitor with the
buttons on the front
panel
No Input Signal when
user controls are
pressed
The picture does not
fill the entire screen
NOTE: When choosing DP mode, the Auto Adjust function is not
available.
52 Troubleshooting

What You
Experience
Image is centered on
screen, but does not
fill entire viewing area
OSD does not appear
on the screen
No picture, the LED
light is white. When
you press "up", "down"
or "Menu" key, the
message " No input
signal" will appear.
The picture cannot fill
the height or width of
the screen
Possible Solutions
• Reset the monitor to Factory
Settings.
• Turn off the monitor, unplug
the power cord, plug back, and
then turn on the monitor.
• Check the signal source. Ensure
the computer is not in the
power saving mode by moving
the mouse or pressing any key
on the keyboard.
• Check whether the signal cable
is plugged in properly. Re-plug
the signal cable if necessary.
• Reset the computer or video
player.
• Run the built-in diagnostics.