Table of Contents
Advertisement
You can convert pictures taken with a [W] aspect ratio to a [Y], a [X] or a [
ratio.
1
Select [ASPECT CONV.] on the [PLAYBACK] Mode menu.
2
Press 3/4 to select [SINGLE] or [SINGLE IN BURST GROUP], and then press
[MENU/SET].
•
The Burst Picture Group cannot be edited with [SINGLE]. Use
[SINGLE IN BURST GROUP]
3
Press 3/4 to select [Y], [X] or [
4
Press 2/1 to select a picture taken with [W] aspect ratio, and then press
[MENU/SET].
5
Press 2/1 to determine the horizontal position, and press
[MENU/SET] to set.
•
Use 3/4 to set the frame position for pictures rotated vertically.
•
Confirmation screen is displayed. It is executed when [YES] is
selected.
Exit the menu after it is executed.
Note
•
After converting the aspect ratio, the picture size may become larger than that of the original
picture.
•
You may not be able to convert pictures taken on other equipment.
•
The [ASPECT CONV.] feature is disabled during the following conditions:
–
Motion pictures
–
Pictures stamped with [TEXT STAMP]
–
Pictures taken with [
•
Information regarding the face recognition in the original picture will not be copied to images
having undergone [ASPECT CONV.].
Playback/Editing
[ASPECT CONV.]
(P146)
.
] and then press [MENU/SET].
], [
] or [
]
- 157 -
] aspect
(P56)
Advertisement
Table of Contents
