Table of Contents
Advertisement
Switching the Information Displayed on the recording screen
[DISP./Fn1] button can be used in two ways, as [DISP.] (display
as [Fn1] (function 1). At the time of purchase, it is initially set to
[DISP.].
•
To switch the setting, select using [DISP./Fn1] in [CUSTOM] menu.
–
Display information of the recording screen can be switched when
[DISP.] is selected.
–
A function can be assigned to a button when [Fn1] is selected. Refer to
about the function button.
Press [DISP.] to change.
•
Recording screen can also be switched by touching [
When [DISP./Fn1] in the [CUSTOM] menu is set to [Fn1],
use [
].
•
You can select between [
(viewfinder style) for each of the LCD monitor and the viewfinder display screen using
[LCD DISP.STYLE] and [LVF DISP.STYLE] in the [CUSTOM] menu.
([
] LCD monitor style)
•
Screen will switch as follows:
¢1, 2
–
With information
–
Without information
([
] viewfinder style)
•
Screen will switch as follows:
–
With information (detailed information)
¢1
–
With information
¢1 Guide lines are displayed when the [GUIDE LINE] of the [CUSTOM] menu is set to anything
except [OFF].
¢2 Histograms are displayed when the [HISTOGRAM] of the [CUSTOM] menu is set to [ON].
It is also possible to display the Exposure meter by setting the [EXPO.METER] of the
[CUSTOM] menu to [ON].
] (LCD monitor style) and [
¢1
¢1, 2
(P138)
Basic
].
]
- 37 -
or
)
P99
for details
Advertisement
Table of Contents
