Table of Contents
Advertisement
Bank Data Transfer Commands
Transfer Bank Data to the Controller <BKMC2CTR command>
This command transfers bank data stored on the Memory Card to a specified Sensor
Controller.
<Command format>
B K M C 2 C T R
Bank file No. (max. 3 digits)
Example: To transfer bank file No.2 on the Memory Card to the Sensor Controller of CH1
B K M C 2 C T R
<Response format>
When processing ends successfully
C R
O K
When processing fails
C R
E R
Save Bank Data to Memory Card <BKCTR2MC command>
This command saves the data of banks 1 to 16 on a specified channel to the Memory
Card as a single bank file.
<Command format>
B K C T R 2 M C
Example: To save the bank data of CH2 to the Memory Card using bank file
No.10
B K C T R 2 M C
<Response format>
When processing ends successfully
C R
O K
When processing fails
C R
E R
ZG2-DSU User's Manual
C R
Target Sensor Controller CH
(1 digit)
C R
2
1
C R
Target Sensor Controller CH (1 digit)
Bank file No. (max. 3 digits)
C R
1 0
2
Serial Communication
65
Advertisement
Table of Contents
