Select The Logging Target; Logging Measurement Values; Logging Profiles - Omron ZG2-WDS8T User Manual

Select the Logging Target

Measurement values and profiles can be selected as logging targets.

Logging Measurement Values

 FUN mode-[SOURCE]-[VALUE]-[CH1 or CH2]-[TASK1 to TASK8]
Setting value
OFF/ON
Note
CH2 is not displayed when it is not connected.

Logging Profiles

 FUN mode-[SOURCE]-[PROFILE]
Setting value
OFF/CH1/CH2
Important
When two Sensor Controllers are gang-mounted, profiles are logged on only either one of the
Sensor Controllers.
ZG2-DSU User's Manual
Description
Sets the channel (CH) and task No. of the Sensor Controller
targeted for logging to ON.
Description
Sets the channel (CH) of the Sensor Controller targeted for logging.
Select the Logging Target
31