Table of Contents
Advertisement
Sign
Integer
Decimal point
Digits past the decimal
point
Available Commands
Measurement value acquisition/profile acquisition commands
Command
name
CFLOGGET
CFPRFGET
MEASURE (or
M)
Bank data transfer command
Command
name
BKMC2CTR
BKCTR2MC
Setting acquisition/change commands
Command
name
DATAGET
DATASET
DATASAVE
VERGET
CHGET
60
Serial Communication
The sign (+, -) of the measurement value is stored.
When the integer section of the measurement value is less
than 3 characters, it is prefixed with spaces for the number of
insufficient data.
is reduced, the length of the text string decreases proportionately.
<Measurement value> <Data configuration>
+12.34567
+12.34567
-0.00123
At measurement error
Description
Acquires the measurement values saved on the Memory Card.
Acquires the profiles saved on the Memory Card.
Acquires measurement values set at [I/O SET].
Description
Transfers bank data stored on the Memory Card to the Sensor
Controller.
Saves bank data on the Sensor Controller to the Memory Card.
Description
Acquires the setup data on the Data Storage Unit.
Changes the setup data on the Data Storage Unit.
Saves all bank data to the Data Storage Unit's flash memory.
Acquires the version information system.
Acquires the number of connected Data Storage Units.
When the number of digits past the decimal point
+ 1 2 . 3 4 5 6 7
C R
+ 1 2 . 3
C R
-
0 . 0 0
1
-
9 9 9 . 9 9 9 9 9
Number of digits past
C R
the decimal point: 5
Number of digits past
the decimal point: 1
Number of digits past
the decimal point: 3
C R
Refere
nce
p.61
p.63
p.64
Refere
nce
p.65
p.65
Refere
nce
p.66
p.66
p.67
p.67
p.68
ZG2-DSU User's Manual
Advertisement
Table of Contents
