Amplifier Volume Override - Zenith H27E46DT Installation And Operating Manual, Warranty

Amplifier Volume Override

Sets up your amplifier to be operated in all remote control modes
1
Find the code that operates your amplifier. Test it
to make sure it's the correct one by following the
procedure in "Programming Your Remote" on the
previous page.
2
Program your audio system into one of the avail-
able AUX modes: Aux, Aux+1, Aux+2, or Aux+3.
3
Press and hold PRG on your remote until the indica-
tor light stays lit, then release.
4
Press 4-9-9; then ENTER on the remote. The indica-
tor light will flash three times the code was accept-
ed.
Audio system volume/mute now appears in all
modes.
Note: You can also program Cable Box Volume and
Mute control (if available) into your cable box
mode (CABLE or AUX mode) by repeating the steps
for programming on the previous page but entering
3-9-9, instead of a brand code, then pressing
ENTER.
Your volume and mute keys now control your amplifier, while
all the other keys still operate the Presentation TV. To put
everything back to normal, reprogram all modes with their
original codes (see the "Programming Your Remote" page).
If you can't find the code for your amplifier, use the Auto
Find feature on page 49.
Mini glossary
AMPLIFIER An electronic device that amplifies sound from a television, CD player, VCR, or other A/V device.
206-3602
3
PRG
Indicator Light
CABLE
SURF
VOLUME
1
4
7
0
MENU
RECORD
REWIND
POWER
2
VCR
AUX TV
FLASHBK
MUTE
CHANNEL
VOLUME
CHANNEL
2 3
5 6
4
8 9
4
ENTER
QUIT
TV/VCR
PAUSE TIMER
SOURCE
PLAY
FFWD
STOP
P A G E 4 7