Channel Labels (Preset And Custom) - Zenith H27E46DT Installation And Operating Manual, Warranty

Creating Custom Channel Labels
Customize channel names by using your own custom
channel labels
To Make Custom Channel Labels
1
First select a channel using the NUMBER keypad and ENTER or
the Channel Up/Down arrows, on the remote control.
(To select a deleted channel, use the NUMBER keypad and
ENTER.)
2
To program a channel label, press MENU repeatedly to go to
the Setup menu, then select CH LABELS.
3
Press the Right Adjust arrow to scroll the available preset
labels. Scroll past - - - -, scroll past NONE, to go to the first
programmable label slot, LAB 1 (Label 1). Notice that the
label appears with the title LAB 1, and is also on a dark back-
ground; which will distinguish it from the preset labels.
Operating the Custom Labels Menu
4
Use Volume Up/Down to select the first letter.
a. Press MUTE to clear the label if necessary.
5
Use Channel Up/Down to scroll through and change the char-
acter to one of the 255 characters available.
Repeat Steps 4 and 5 to set characters for the other spaces
available on the label.
6
Press ENTER to remove menu when finished.
Menu Operation Notes:
Adjust Left/Right
Volume Up/Down
MUTE
Channel Up/Down
ENTER
Mini glossary
- - - - The 4 dashes will allow a channel label to appear; if one is provided by the broadcaster.
NONE Prevents any channel label from appearing.
LAB 1, Are the 20 programmable labels. They can be customized for your needs with 5 characters spaces available on each label.
thru LAB 20, (A blank letter space is available if required, after the "!" symbol.)
P A G E 2 8
Switches to the next label.
- - moves to the next or previous
label.
Selects character spaces
- - moves to the next or previous
character space.
Removes current label,
- - if first character space is
selected.
Scrolls through the available
characters.
Accept the channel label and
removes the menu.
AUTO PROGRAM
ADD/DEL/BLNK
CH. LABELS
CLOCK SET
TIMER
CAPTIONS
ALARM MENU
LANGUAGE
PRESS VOL UP/DN TO SELECT CHAR
PRG
VCR
CABLE AUX
SURF FLASHBK
CHANNEL
VOLUME
4
CHANNEL
1 2
4 5
7 8
0
ENTER
3
2
MENU
RECORD PAUSE TIMER
PLAY
REWIND
STOP
CH 30 MYLAB
POWER
TV
4/A
MUTE
1/5
4
VOLUME
1/5
3
6
9
6
QUIT
3
TV/VCR
SOURCE
FFWD
206-3602