Oricom ANU1150 User Manual

ORICOM CUSTOMER SUPPORT
Oricom have a trained and dedicated team of Customer Support
Representatives, each with the knowledge and resources to assist in
answering your questions quickly and efficiently.
Oricom Support - Australia
For all product enquiries, troubleshooting or to discuss the range of Oricom
products, feel free to contact Oricom or visit our website for answers to
frequently asked questions.
02 4574 8888
Monday - Friday 8am – 6pm AEST
Email: support@oricom.com.au
www.oricom.com.au
Oricom Support - New Zealand
0800 674 266
Monday - Friday 11am - 7pm NZST
Email: support@oricom.co.nz
ANU1150
ANU1150 Pack Includes:
• 3dBi UHF CB Antenna with heavy duty custom spring base (length 430mm)
• 600mm Fiberglass extension whip to convert to a 1m 6.5dBi high gain antenna
• Includes grub screw and hex key to secure the fiberglass whip.
Installation
1) Install the 430mm
Tighten in a clockwise direction, using a hexagon
wrench or spanner. IMPORTANT: Do not exceed 50N
To convert to a 1m 6.5dBi gain antenna
)
clockwise
IMPORTANT
2)
3)
3)
MAX:15N
ANU1150
onto the
1)
MAX:50N
whip
Images are for illustration
purposes only.