Oricom ANU1100 User Manual

Contact Details for Oricom Support and
Warranty claims in Australia
Oricom International Pty Ltd
Unit 1, 4 Sovereign Place
South Windsor, NSW 2756 Australia
Email: support@oricom.com.au Phone:
1300 889 785 or (02) 4574 8888
(Monday to Friday 8am to 6pm AEST)
Web: www.oricom.com.au
Fax: (02) 4574 8898
Contact details for Oricom Support and
Warranty Claims in New Zealand
Email: support@oricom.co.nz
Phone: 0800 674 266
(Monday to Friday 10am to 8pm NZST)
Web: www.oricom.co.nz
ORICOM UHF CB ANU1100 ANTENNA USER GUIDE
USER GUIDE - ORICOM ANU1100 ANTENNA
ANU1100 Pack Includes:
• 3dBi UHF CB Antenna with heavy duty custom spring base (length 430mm)
• 600mm Fiberglass extension whip to convert to a 1m 6.5dBi high gain antenna
• Includes grub screw and hex key to secure the fiberglass whip.
Installation
1) Install the 430mm 3dBi base and pole (Stubbie Antenna) onto the
bracket (not supplied). Tighten in a clockwise direction, using a hexagon
wrench or spanner. IMPORTANT: Do not exceed 50N
To convert to a 1m 6.5dBi gain antenna
2) Remove the cap from the 3dBi Stubbie
antenna by turing in an anti-clockwise
direction. IMPORTANT: Place the cap
in a safe place - always operate the
3dBi Stubbie antena with the cap fitted.
2)
Install the Fiberglass extension whip onto the base by turning in a clockwise
3)
direction and secure in place with the grub screw (using the hex key
provided). Hand tighten only MAX. 15N
3)
MAX:15N
1)
MAX:50N
Images are for illustration
purposes only.