Table of Contents
Advertisement
SNMP Version
SNMP Get
Community
SNMP Set
Community
SNMP Trap
SNMP Trap
Community
SNMP Trap
Manager
HTTP
Internet browser HTTP protocol management interface
TELNET
Client terminal with telnet protocol management interface
SNMP
Simple Network Management Protocol. SNMPv1, v2 & v3 protocol supported.
SNMPv2 can be used with community based authentication. SNMPv3 uses
user‐based security model (USM) architecture.
When SNMP is enabled, complete the SNMP
fields below.
Select SNMP version appropriate for your
SNMP manager.
Enter an SNMP Get Community name for
verification with the SNMP manager for
SNMP‐GET requests.
Enter an SNMP Set Community name for
verification with the SNMP manager for
SNMP‐SET requests.
Enable or disable SNMP Trap to notify SNMP
manager of network errors.
Enter an SNMP Trap Community name for
verification with the SNMP manager for
SNMP‐TRAP requests.
Specify the IP address or sever name (2‐128
alphanumeric characters) of the SNMP
manager.
61
AP Mode
Advertisement
Table of Contents
