Table of Contents
Advertisement
IV‐3‐2. WPS
compatible devices. WPS can be activated on compatible devices by pushing
a WPS button on the device or from within the device's
firmware/configuration interface (known as PBC or "Push Button
Configuration"). When WPS is activated in the correct manner and at the
correct time for two compatible devices, they will automatically connect.
"PIN code WPS" is a variation of PBC which includes the additional use of a
PIN code between the two devices for verification.
Please refer to manufacturer's instructions for your other WPS
device.
Wi‐Fi Protected Setup is a simple way
to establish connections between WPS
46
AP Mode
Advertisement
Table of Contents
