Sony VLP-CH350 Operating Instructions Manual page 22

The corners of the image to be corrected
1 Move the s by using V/v/B/b to select the corner you want to correct.
If you press ENTER, you will go back to the cursor display.
2 Adjust the position of the corner you want to correct by using V/v/B/b.
3 The cursor will disappear if the adjustment range limit is reached.
Press the RESET key to restore the projected image before adjustment.
Displaying a pattern
You can display a pattern for adjusting the projected image or a grid pattern with the PATTERN
key on the remote commander. Press the PATTERN key again to restore the previous image.
You can use a grid pattern as a guide to write text or to draw lines and shapes on the whiteboard
or blackboard without using a computer.
Note
You cannot use this key when "Type B USB" or "Network" is selected as the input.
22
Projecting an Image
Adjust using this cursor.
Example of cursor display:
You can adjust in all directions.
You can adjust only to the left/
right or downwards.