Speaker Setup - GoVideo D2740 User Manual

Analog Audio Settings

Speaker Setup

Use to identify the type and size of
speakers in your audio setup:
1
From Stop mode, press SETUP.
2
Select Analog and press ENTER.
3
Use the  keys to select Speaker
Set and press ENTER.
Note:
• Only the active speakers are listed
in the Speaker Set field.The default
setup is LR (Left and Right) only.
4
Use the keys to select each of the
following:
Subwoofer
Indicates whether or not your audio
setup includes a Subwoofer (SW).
•
Select "Subwoofer" , and then use the
 keys to select On or Off.
Surround
Indicates whether or not your audio
setup includes Left Surround (LS) and
Right Surround (RS) speakers.
•
Select "Surround" , and then use the
 keys to select On or Off.
Center
Indicates whether or not your audio
setup includes a Center (C) speaker.
• Select "Center" , and then use the 
keys to select On or Off.
(continued)
Center Speaker Size
Indicates the size of your center and
surround speakers (if applicable).
•
Select "Ctr Spkr Size" , and then use the
 keys to select Large (for full-
range speakers) or Small (for speakers
that are not capable of producing
bass).
5
Select OK and press ENTER.
6
Press SETUP or RETURN to exit the
Setup menu.
6 - Advanced Settings & Preferences
53