Wireless Network Settings; Wireless Security Settings - GoVideo D2740 User Manual

Network Settings

Wireless Network Settings

To configure the DVD Player for a wireless
network:
1
From Stop mode, press SETUP.
2
Select Network and press ENTER to
search for a network.
• "Searching for wireless networks" is
displayed followed by a list of avail-
able networks.
• Networks using access points are
designated as "ACC PT."
• Peer-to-Peer networks are desig-
nated as "P2P." To create a new
Peer-to-Peer network, select "Create
a Peer-to-Peer Network" and press
ENTER.You will be prompted to
enter a Name and select a Channel
(1-11) for the network, then press
OK.
• Networks using WEP security are
indicated by
3
Select one of the detected networks
and press ENTER.
4
After a brief delay,"Successfully joined
<Network>" is displayed. Press ENTER
to continue.
• "Loading network settings" is dis-
played and you are returned to the
Network screen.
5
The IP address appears at the bottom
of the screen. If the first two blocks
of the IP address for the DVD Player
and PC match, you have successfully
joined the network.
NOTE:
• For detailed information on WEP settings, please refer to "WEP FAQs" on page 60.
48
DVD Player User's Guide
, those without by .
(continued)
• To change the method by which
the IP address is obtained, see "Get-
ting an IP Address" on page 47.
• To rename the DVD Player, see
"Naming the Player" on page 47.
• To change the network security set-
tings, see "Wireless Security" below.
6
Select OK and press ENTER.
7
Network setup is complete! Press
SETUP or RETURN to exit the Setup
menu.

Wireless Security Settings

To change the security settings for a
wireless network:
1
From Stop mode, press SETUP.
2
Select Network and press ENTER.
3
Select "Security (WEP Settings)" , and
press ENTER.
4
Use the  keys to choose one of
the available options:
Disabled (default) - Recommended
for Streaming Media.
Hex digits - Enter the Key size (64/40
bits or 128/104 bits), Key Index (0-3)
and Key data in Hex format for your
wireless network.
ASCII characters - Enter the Key size
(64/40 bits or 128/104 bits), Key Index
(0-3) and the Key data in ASCII format
for your wireless network.
5
Select OK and press ENTER.
6
Press SETUP or RETURN to exit the
Setup menu.