Video Settings - GoVideo D2740 User Manual

Video Settings

The Video menu allows you to set your
preferred aspect ratio for DVD movies
and specify your video connection
method.
1
From Stop mode, press SETUP.
2
Select Video and press ENTER.
3
Use the  keys to select each of
the following:
TV Aspect Ratio
Sets your preferred format for DVD
movies to match the shape of your
television screen.
• Select "Set TV Aspect" , and then use
the  keys to select:
Fullscreen (Default) - Se-
lect if you have a standard
4:3 television and prefer to
watch full-screen versions
of DVD movies (if available).
Letterbox - Select if
you have a standard 4:3
television and prefer to
watch widescreen versions of DVD
movies (if available). Movies will
display in letterbox format; i.e., black
bars will appear above and below the
picture.
16:9 - Select if you have
a widescreen 16:9 tele-
vision.
NOTE:
• The VIDEO OUT key allows you to
switch between PS (Progressive Scan)
and IS (Interlace Scan) modes.
50
DVD Player User's Guide
Video Output
Sets the Video Output to match the
method you used to connect the DVD
Player to your TV.
•
Press the VIDEO OUT* button repeat-
edly to select:
Composite (Default) - Select if you
connected the DVD Player to your TV
using the Composite Video output.
S-Video - Select if you connected
the DVD Player to your TV using the
S-Video output.
Component - Select if you connected
the DVD Player to your TV using the
Component Video output.
Progressive - Select if you connected
the DVD Player to your TV using the
Progressive Video output. If your TV
does not have a Progressive Scan
input, the screen will go blank when
you select Progressive Scan. Press
VIDEO OUT again to select a different
Video Output.
4
Select OK and press ENTER.
5
Press SETUP or RETURN to exit the
Setup menu.