Dvd Playback - GoVideo D2740 User Manual

DVD Playback

Playing a DVD
Follow these steps to play a DVD.
1
Turn on the DVD Player using the
front panel POWER button.
• If the unit is in Standby mode, press
POWER on the remote control to
power on the unit.The blue LED will
light behind the front panel arrow
keys.
2
Turn on your TV, and set it to the AV
input connected to the DVD Player.
3
Turn on your audio system (if applica-
ble), and set it to the input connected
to the DVD Player.
4
Press OPEN/CLOSE on the remote
control or front panel to open the
disc drawer.
5
Place the disc in the
drawer with the label
side facing up.
• If the disc has two
sides, place the disc
with the desired
playback side facing
down.
6
Press OPEN/CLOSE
again to close the disc
drawer.
7
Press PLAY on the remote control
or front panel.
• Many discs will load and begin
playing automatically when the disc
drawer closes.
• If the DVD has a disc menu, or more
than one title, the disc menu may
appear; see column at right.
8
Adjust the playback volume by press-
ing the VOL+/- keys on the remote
control.
Disc Menu Navigation
DVD disc menus allow you to select
chapters for playback, change the disc's
default playback settings (such as Audio
format and Subtitle language), and
access any special features on the disc.
Use the following keys to navigate DVD
disc menus.
MENU - Press to display the disc
menu for the currently loaded disc.
Menu contents vary by disc.
 - Press to move the cursor
left, right, up, and down in the disc
menu.
0-9 - Press to make direct selections
in some disc menus.
ENTER - Press to make selections and
confirm settings in the disc menu.
RETURN - Press to display the previ-
ous menu or to exit the disc menu.
���� ����
���
5 - Playing DVDs and Other Discs
�����
������
41