Analog Audio Settings; Speaker Test - GoVideo D2740 User Manual

Wireless media receiver + dvd player
Hide thumbs Also See for D2740:
Table of Contents

Advertisement

Analog Audio Settings

The Analog menu allows you to adjust
analog audio settings, including Pro
Logic, speaker delays, and speaker sizes/
configurations.
1
From Stop mode, press SETUP.
2
Select Analog and press ENTER.
3
Use the keys to select each of the
following:
Pro Logic
The DVD Player has a built-in Dolby
Pro Logic decoder to provide virtual
surround sound from the 5.1 channel
analog audio outputs.
Select "Pro Logic" , and then use the
 keys to select:
Auto (Default) - Stereo audio
soundtracks will be output in Dolby
Pro Logic mode.
On - All audio soundtracks will be
output in Dolby Pro Logic mode.
Off - Dolby Pro Logic is disabled.
Center Delay
Use to delay the sound from the center
speaker so that it arrives at your primary
listening area at the same time as sound
from the left and right front speakers.
Select "Ctr. Delay" , and then use the
 keys to set the delay from 0-1.75
meters (see table).
Surround Delay
Use to delay the sound from the
surround speakers so that it arrives at
your primary listening area at the same
time as sound from the left and right
front speakers.
Select "Surr. Delay" , and then use the
 keys to set the delay from 0-5.25
meters (see table).
52
DVD Player User's Guide

Speaker Test

Use to adjust the relative sound balance
of your speakers if you connected the
DVD Player to a 5.1-channel amplifier:
Select "Speaker Test" and press ENTER.
A "pink noise" test tone is automati-
cally sent to each of the six speakers
in a continuous loop.
The test tone is broadcast for approxi-
mately 5 seconds in each speaker.
Adjust the speaker levels as required
by your amplifier.
When finished, press STOP to can-
cel the test tone.
4
Select OK and press ENTER.
5
Press SETUP or RETURN to exit the
Setup menu.
Metric Conversion
0.35m = 1.2 ft.
0.70m = 2.3 ft.
1.05m = 3.4 ft.
1.40m = 4.6 ft.
1.75m = 5.7 ft.
2.10m = 6.9 ft.
2.45m = 8.0 ft.
2.80m = 9.2 ft.
3.15m = 10.3 ft.
3.50m = 11.5 ft.
3.85m = 12.6 ft.
4.20m = 13.8 ft.
4.55m = 14.9 ft.
4.90m = 16.1 ft.
5.25m = 17.2 ft.

Advertisement

Table of Contents
loading

Table of Contents